*RMR/SRO & Holosun C Series Optic Cuts recommend iron sight upgrades for co-witness. [Optional] Select Trijicon night sights for the bottom 15% co-witness.
*Lead Times*
Cut Info:
- ACRO / PB-3 - sets .33" further to the rear, aligning front of optic to rear of the ejection port cut out. Whole Slide is recoated in Cerakote. 50% Armorer's Black, and 50% Graphit Black. [6-32 countersunk screw.
- RMS / Holosun K-Series - Cerakote on optic cut out only. [M3 Screw, Flat top for RMS, Countersunk for Holosun.
- RMR / Holosun C-Series - Cerakote on optic cut out only. [6-32 countersunk screws]
All screws should protrude no longer than .125" or 3mm out of the bottom of the optic. While holding the optic in your hand, drop a screw into the optic screw mounting hole. Measure the length of the protrusion; 2.95mm or .120" is < max. & safe. Screws must protrude at least 2.5mm or .0985", obtaining approximately 3.5 turns of the mounting screw.
2 Weeks: Barrel Porting & Trigger Work
8 Weeks: Optic Cuts
SEND IN Your Own Type B Gen 1 or 2 for Customization, or Build one from our supply.
SEND IN Instructions:
Include Order #
* You may send in directly without using an FFL (dealer) in most states [check your local and state laws]
* ADDRESS: RAIN6 877 W Hwy 40 Vernal, UT 84078
1 Review Hide Reviews Show Reviews
-
Type B w/ Combat Trigger Job & Granulate Tape
The Gen 2 ergonomics and modular frame are a very worthwhile upgrade. You are practically getting 3 guns in one! The Combat Trigger Job is Incredible, the reset is so short that I can hardly believe it. Defined wall, no evertravel. I added an Iron Horse Stage 1 Trigger job for a further reduced pull. This is the best trigger you'll find on a striker fired pistol. Meaning the skies the limit if you commit to learning just how intuitively the Type B shoots. The granulate tape creates rock solid connection to the gun which further amplifies the visceral shooting experience of the Type B. You'll need to account for that for AIWB holsters, but there are other options available & you can always stipple the gun.
